How to Buy Cooler Seals in Canada Online

Cooler Seals Canada

Whether you’re an ice cream shop owner, a grocery store, a restaurant, or a bar, there’s one thing that they all have in common—and it’s the coolers. How do you make your next Walk-in Cooler seal order a success? With the right information, of course. This is what makes our cooler seal guide so helpful to you and your business. We’ve gathered the best information to help you make ordering, installing, and maintaining your cooler seals a success! 

The Reasons your Cooler Seals need replacement
The seals on your refrigerator doors may wear out either from repeated general use or excessive wear and tear caused by handling. Commercial kitchens are even more prone to the same wear and tear as regular households due to the increased use and large variations in the internal temperatures of the cooler and the external ambient temperatures. The lifespan of a gasket is relatively long. However, the materials from which gaskets are made are somewhat fragile, so they deform over time. This can lead to a decrease in sealing efficiency and thus air leaks.
The Importance of Gasket Replacement

5 Step process to make your Cooler seal order a success?

Refrigaskets has been making cooler seals in Canada for many years. With thousands of orders processed, we have developed a 5-step process to make sure your cooler seal order is successful. You get a seal that matches the specifications and lasts a long time.
Step-1: Determine if the seal needs replacement

Typically, when a cooler’s seals begin to wear, you will see torn or ragged edges on the gasket, or it is falling off track. These signs make it obvious that you need to change the seal. Worse yet, there can be frost beginning to build up around the seal of the door.

If the signs of wear and tear are not obvious, then you can do some tests to determine whether the seals need to be replaced or not. You can either do the paper test or the light test and explain in detail in this post. These tests will give you an idea of whether the seals need replacement or not.

Step-2: Identify the right profile for your cooler seal

The gasket profile provides information about the dart, magnet, and shape to help identify the type of seal you need to buy. Therefore, It is important to identify the correct profile for your cooler seal before buying.

To do this, take one corner of your refrigerator gasket out from the track and take a picture of its cross-section, or cut a piece off and photograph it.

It is also possible to picture the side and top view for a gasket that is screwed on instead. Then, match your gasket with our common profiles to know what type you need to buy.

Step-3: How to measure the right size, so it fits perfectly

The gasket needs to be measured correctly once you have identified the right profile for your cooler seal for a perfect fit. To measure the dimensions of the gasket, you have to take a tape measure. You can measure the size of your refrigerator gasket in three different ways. It is possible to measure it in-between the outside edges, Magnet-to-Magnet or Dart-to-Dart. Finally, measure the length and width of the seal and then send it to us using our online form.

Step-4: Order your Cooler seal

Once you have the dimensions and profile for your gasket, it is time to order it. We recommend using our online form so you can send us the information about your gasket and get a quote. We will get back to you as soon as we have received your order.

We are committed to offering the highest quality products and services. We take great pride in our products and customer service. We understand that you are purchasing a valuable part and want to ensure you are satisfied with your purchase. Therefore, we strive to ensure that your order is delivered as fast as possible and is exactly what you expected.

Step-5: How to properly install the cooler seal

When you have received the correct profile of your cooler seal, it is time to put it on your refrigerator. The quality of the seal on your cooler can make a huge difference in the longevity of your refrigerator. If you follow the instructions, you will install a new seal on the fridge quickly. The easiest way to install a push-in gasket is to line it up on the refrigerator door tracks and then snap it into place. If your cooler has a screw-in seal, it will be a little more difficult to remove the old gasket and replace it with a new one, but the basic process is the same.

Before installing a gasket, it is recommended to clean the unit thoroughly to ensure there is no dirt or grease. Another tip: If you want to easily make the seal work into the cooler door, you can either dip it in the warm water bucket or use a blow dryer to warm up the material lightly, making it more malleable.

Maintaining gaskets to ensure a long-lasting seal

Smooth contact is needed for the gasket to form an air-tight seal with the door. So it is recommended that you keep it clean. Regularly cleaning your refrigerator gaskets will help ensure they work properly and last longer. Using harsh cleaners could harm the smooth surface of the seal, so it is better to use just warm water and mild soap to wipe it clean periodically.

The area around the gaskets is a potential hotbed for mold and mildew due to the moisture inside the refrigerator and warm air outside. Clean this to avoid any damage to the gaskets and food safety issues.

Summary

To summarize, we’re here to help you find the perfect fitting cooler seal that matches the manufacturer’s specifications.

Identifying the type of gasket you need is the first step. Also, the correct dimensions are required for a perfect fit. We’ve put together this guide to help you figure out the right profile and size of the gasket for your refrigerator. We need pictures and dimensions in order to identify the correct profile.

Next, clean the area before installing, and then snap it in place or fix it with screws. You have successfully replaced your cooler seal!

Why Choose RefriGaskets.ca for your next Cooler Seal in Canada

Looking for a cooler seal provider in Canada? Look no further! RefriGaskets.ca is a one-stop-shop for all of your cooler seal needs. From coolers to freezers, We offer a wide variety of high-quality seals for all the commercial brands like True, Delfield, Anthony, Silver King, etc.

We have been in the gasket business for many years, and we know what it takes to ensure your gaskets are installed properly and will last a long time. Just reach out to us with a picture of the gasket and the dimensions of your refrigerator and we will send you the correct cooler seal that fits your model.

Our gaskets are made of high-quality food-safe materials. As a result, you can rest assured that your refrigerator will remain safe and free of harmful bacteria. They are also easy to install, clean, and last a long time.

Our service is fast and easy. We can ship your cooler seal anywhere in Canada as fast as possible so your business can stay running smoothly.

If you have questions about our products or services, please contact us now!

Shipping Info

Across Canada

Return Policy

*Simple Returns

u
FAQ

Frequently Asked Questions

Your Account

Create or login to your account to track your orders and shipments.

Shipping Info

Across USA

Return Policy

*Simple Returns

u
FAQ

Frequently Asked Questions

Your Account

Create or login to your account to track your orders and shipments.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop